Fibro Chem , LLC

Lubricants

FIBRO LUBE BLA-2

This product is a blended anionic and nonionic staple fiber finish that imparts bundle cohesion, antistat properties, fiber to fiber cohesion and good fiber to metal lubricity on nylon and other synthetic staple fiber. The spinner when using this product at 0.50-1.00 % owf will realize improved card web strength, reduced powdering at twisting, and reduced hairiness of the yarn.

FIBRO LUBE MLF

This product imparts all the properties of Fibro Lube BLA-2 with lower foaming and improved lubricity both fiber to fiber and fiber to metal. The recommended use level is 0.25-1.00% owf depending on equipment and fiber properties.

FIBRO LUBE PSO-2004B

This lubricant is a very hydrophobic system that imparts excellent fiber to fiber and fiber to metal lubricity. Other advantages from the use of this product are very low smoke, reduced powdering at twisting, low odor and environmentally friendly.

FIBRO LUBE SPE-80 MOD

SPE-80 MOD provides excellent coating of a synthetic fiber surface while imparting excellent fiber to metal lubricity and moderately high fiber to fiber lubricity. A use level of 0.5-2.00% owf is recommended.

FIBRO LUBE B-2116

This product gives surface protection to brittle fibers and lower fiber to metal friction. When used at 0.75-2.0% owf, Fibro Lube B-2116 will prevent powdering of Polyester and other synthetic staple fibers.

FIBRO LUBE PSO-3

This product is custom formulated to give ultra high fiber to metal lubricity while having good fiber to fiber lubricity. This product is useful on polyester or nylon when processed with high speed spinning and twisting.

FIBRO LUBE MFM

This lubricant is designed to give a softer feel to yarns while providing good bundle cohesion, excellent yarn strength, good fiber to fiber lubricity, and good fiber to metal lubricity. A use level of 0.5-1.00% owf is recommended.

Antistats

FIBROSTAT 101A

This product is an anionic antistatic agent offering exceptional static control in processing synthetic fibers. It contributes cohesion to the overspray mix and can be used on a wide variety of fibers under a broad range of conditions.

FIBROSTAT C-2000

This antistat is a complex phosphate ester antistat for use in processing of synthetic fiber. This product offers maximum static control while providing a good fiber to fiber cohesion to the yarn.

FIBROSTAT BW

A complex phosphate ester antistat which exhibits excellent static control while having little or no impact on the lubrication/cohesion balance of the fiber overspray mix.

Other Auxiliaries

FIBRO LUBE A-41-T

Fibro Lube A-41-T is an overspray additive that builds bundle integrity and adds some cohesion to yarns. This product is especially suitable for holding short, broken fibers or garneted waste into the staple spun yarn.

FIBRO LUBE MSA

Fibro Lube MSA is an additive which imparts fiber to fiber lubricity and fiber to metal lubricity. A soft hand is given to the fiber. This additive is cationic in nature and has excellent antistatic properties.

FIBRO ANTISLIP

Fibro Antislip is an overspray additive that increases fiber to fiber cohesion and builds yarn strength of low crimp level or fine denier synthetic yarns.

FIBRO LUBE HPH-2

Fibro Lube HPH-2 is a hydrophilic “humectant” type additive. This product retains moisture on the fiber surface, allowing consistent processing under adverse conditions, such as start up after shut downs and cold weather, low humidity situations. Use of this product minimizes the effect of fluctuating humidity on yarn consistency.

FIBRO LUBE 2200

Fibro lube 2200 is a two for one twister lube which allows high speed twisting of synthetic yarns while minimizing “powdering” and “dusting”. This product is a100% active, low viscosity liquid and can be applied by wicks.

FIBRO WET DOSS-LH

Fibro wet DOSS-LH is an anionic wetter for use in overspray formulations. This is a high efficiency wetter which gives uniform fiber wetting and overspray coverage.

FIBRO WET RK-1

This product is a non-ionic wetter designed to be incorporated into spin finish formulations. This wetter produces consistent, uniform fiber coverage of synthetic and natural fibers with overspray formulations.

FIBRO RING OILS

Ring oils are available in a wide selection of viscosities. White oils and process oils are available. The oils are available with ring cleaners added if necessary.

SUESSEN CLEANERS

Alkaline cleaners as well as low-alkalinity cleaners are available, depending on the severity of deposits. Other machine cleaners are also available.

Bulked Continuous Filament (BCF)

FIBRO LUBE 1760

99% active nylon and PET lubricant designed for a neat application, and processed on a variety of BCF equipment. FIBRO LUBE 1760 Imparts very good downstream performance through twisting & heat-setting.

FIBRO LUBE 1453

99% active nylon and PET lubricant similar to FIBRO LUBE 1760. FIBRO LUBE 1453 can be applied either neat or from 15% to 40% activity and maintain a stable solution.

FIBRO LUBE 1512

90% active all-purpose polypropylene lubricant designed for moderate to heavy dpf yarn applied neat. FIBRO LUBE 1512 is suitable for various downstream processes, including air-entangling, twisting & heat-setting.

FIBRO LUBE 2066A

99% active nylon, PET, and PTT designed for neat application.

FIBRO LUBE 697

97% active polypropylene lubricant that is similar to FIBRO LUBE 1512, and designed for application from 15-30% active solutions, either via metered or kiss-roll application. FIBRO LUBE 697 has a very high pick-up for kiss roll applications.

FIBRO LUBE 1808

95% active polypropylene lubricant designed for fine dpf yarns, applied neat or in a 15-30% solution.

FIBRO LUBE POF 25

95% active polypropylene lubricant designed to provide high scroop, typically for medium to heavy dpf yarns. FIBRO LUBE POF-25 can be applied neat or 15-30% active, via metered or kiss roll.

FIBRO LUBE 1798

90% active polypropylene lubricant designed to provide a soft hand, typically used for rug yarns. FIBRO LUBE 1798 has very good downstream processing, and is designed to be applied neat or from 15-30% solutions.

Staple Fiber Extrusion

FIBRO LUBE 2228

A primary and secondary PET carpet staple fiber lubricant designed for 2-step processes, and is nonylphenol-free. FIBRO LUBE 2228 is suitable for both virgin and recycled PET resin.

FIBRO LUBE 2025

A primary and secondary PET staple fiber lubricant designed for 2-step processes.

FIBRO LUBE P-1056

A 100% active primary and secondary PET staple lubricant designed for 1- and 2-step processes. It meets most automotive fogging requirements.

FIBRO LUBE 2024

A 90% active primary and secondary PET staple lubricant that is similar to FIBRO LUBE P-1056 with greater static protection. It meets most automotive fogging requirements.

FIBRO LUBE MPT-2

A primary PET lubricant designed for 2-step processes. FIBRO LUBE MPT-2 imparts a high degree of cohesion to the tow bundle.

FIBRO LUBE 4414

99% active cationic primary and secondary polypropylene lubricant designed to impart high scroop and antistat protection. FIBRO LUBE 4414 is especially suitable for fiber going into high speed carding for geotextile fabrics. FIBRO LUBE 4414 also meets most automotive fogging requirements.

FIBRO LUBE 1822

FIBRO LUBE 1822 is a 90% active anionic version of FIBRO LUBE 4414. FIBRO LUBE 1822 meets most automotive fogging requirements.

FIBRO LUBE POF 34

Fibro Lube POF-34 is a nonionic finish designed to extrude polypropylene fibers for use in needle punching operations. This product combines fiber to metal lubrication with bundle cohesion and low foaming properties to produce stable and strong needling.

FIBRO LUBE 4317

80% active anionic primary & secondary polypropylene lubricant designed for open end spun applications. FIBRO LUBE 4317 can be applied neat as a secondary application, but can be applied from 15-30% solutions if desired. As a primary lubricant, FIBRO LUBE 4317 is typically applied from a 5% solution at the sizer rolls.

FIBRO LUBE 1982

This product is an 80% active low-foam polypropylene lubricant that meets many FDA requirements. FIBRO LUBE 1982 provides good downstream performance for carding & needle punching, and can be applied either neat or from a 15-30% solution.

FIBRO LUBE 2225

A mineral oil based lubricant for PET fine denier fiber.

Slit Film/Beaming/Fibrillated Extrusion

FIBRO LUBE BWL

100% active polypropylene beaming lubricant designed to be applied neat for a variety of slit film application, including primary and secondary carpet.

FIBRO LUBE 20-291A

100% active polypropylene beaming lubricant designed to be applied neat or in a 10-20% solution for a variety of slit film applications, including primary and secondary carpet.

FIBRO LUBE 720-F

80% active low-foam polypropylene yarn lubricant that meets many FDA requirements that can be applied either neat or from a 15-30% solution. FIBRO LUBE 720-F is also applied to concrete PP fiber.

Bleaching Assistants

FIBROGEN S-75 SUPER

A peroxide bleach bath stabilizer designed specifically for use in jets, becks, kiers, Jemco ranges, Bleach Star ranges, and other continuous bleach ranges. It is useful in low silicate ranges and in all concentrations of caustic soda.

FIBROGEN DS-130

A highly effective peroxide bleach stabilizer designed to provide excellent bath stability while allowing for clean running equipment.

FIBRO SCOUR SVS-2

This is a solvent scour for use in J-boxes. This product has exceptional dispersion properties for oil and waxes removed from cotton, while offering low foam. It provides excellent penetration and wet-out, resulting in good cleansing of goods.

FIBRO SCOUR J-50

An alkali stable, high detergency, nonionic scouring agent, designed for jet bleaching. This product is typically used in conjunction with a small amount of Fibro Defoam SP-108.

Defoamers

FIBRIL B-91

A non-silicone defoamer designed for jets and open atmospheric dyeing equipment. It exercises exceptional foam control without undesirable residue on the surface of the dye bath.

FIBRO DEFOAM DM-10N

A conventional silicone defoamer designed to control foam in low shear dyeing systems. Not recommended for jet dye machines or high shear systems.

FIBRO DEFOAM SPD-5

A “Free Rinsing” silicone defoamer designed to provide excellent foam control even under high shear dyeing conditions without the typical emulsion instability experienced with conventional silicones. This product freely rinses from the textile substrate being processed.

Dye Fixatives

FIBRO FIX 136

A polymeric fixative used to improve wet fastness of direct and reactive dyes on cellulosic and cellulosic blends. This product has little, if any, effect on light fastness and finished shade.

FIBRO FIX 2204 CONC

A concentrated anionic polymeric condensate for improving wet fastness of direct and acid dyes on nylon, cotton and blends.

Fluorochemicals

FIBRIL FCA

A fluorochemical finish especially designed for fabric finishing. This product provides excellent oil and water ratings with exceptional repeatability from batch to batch. It has been extremely effective in manufacturing upholstery fabrics.

FIBRIL TM-4D

An oil, water and stain repellant for use on carpet, FIBRIL TM-4D is an economical flourochemical finish.

FIBRIL FC-1000

This fluorochemical finish is specifically designed to impart dust and water repellency to synthetic fibers.

Fabric Softeners

FIBRO SOFT EURO

A new softener especially formulated to provide a luxurious soft hand to knitted fabric such as fleece or jersey. This product has excellent resistance to yellowing.

FIBRO SOFT KDL

A unique blend of softener bases which offers a slick hand to both flat textile fabric and tufted textiles. It has excellent resistance to yellowing and provides superb needle cutting resistance to knitted or woven fabric.

FIBRO SOFT 2227

This is a unique silicone softener that imparts a slick, buttery hand to nylon.

Durable Press Resins

FIBRO RESIN GNC CONC

This is a high activity, low formaldehyde content DMDHEU type durable press resin.

Leveling Agents

FIBROSIST 48BC

This product is a time proven leveling agent for the application of acid dyes to nylon substrates. It provides good retardation, migration, and barre' coverage.

FIBROSIST DDL SUPER

A disperse dye leveler which offers good dye migration properties with moderate foam.

FIBROSIST HCA/F-78

The use of the combination of these two leveling agents provides the dyer the tools necessary to uniformly apply acid and cationic dyes to "barber pole" yams from the same bath with little, if any effect on light fastness.

Penetrants & Wetting Agents

FIBRO WET DOSS-LH

DOSS is an anionic wetting agent that has been an industry standard for years. It is a 70% Dioctylsulfosuccinate solution, with no alcohol diluents. Not red label.

FIBRO WET 1478

A unique penetrant/wetting agent designed to provide wetting and penetration of the dye liquor into the textile substrate as it is being dyed on high speed continuous dyeing machinery such as the Belmont Continuous Yarn Dyeing Machine.

FIBRO WET NRG

This product is a unique anionic wetting agent with good alkaline stability. This product provides excellent wetting and detergency when used in processing cellulosic fiber in alkaline mediums.

FIBRO WET GTW

A nonionic wetting agent designed to provide quick wetting and penetration for wet out boxes and continuous bleach ranges. It enhances "wicking" properties, promoting uniform application of the bleach liquor

Sequesterants

FIBROQUEST 100

Fibroquest 100 is an EDTA sequestering agent with a chelating value of 100 mg/gm.

FIBROQUEST 80

A special chelating agent that is not susceptible to oxidative decomposition and which improves stabilization in peroxide bleaching.

FIBROQUEST LC

A liquid version of Sodium Hexametaphosphate designed for ease of handling. It provides effective chelation over a wide pH range.

Lubricants

FIBRO AID BCF

An economical winding lubricant designed to facilitate the de-knitting process, resulting in the prevention of hard cones and yarn with less tension. This product can be applied from the dye bath, sprayed on, or applied by kiss roll.

FIBRO AID JBF

A Unique de-knitting lubricant designed for use in the "knit-de-knit' space dyeing process. It can be applied from the dye bath, eliminating the need for pad application or spraying.

FIBRO AID RLR MOD.

Designed to provide exceptional yarn to metal lubrication, thus reducing non-uniform tension in cabling and twisting operations. Typically applied by Kiss Roll.

FIBRO AID SDT

A winding lubricant designed to facilitate the de-knitting process, resulting in the prevention of hard cones and yarn with less tension. This product can be applied from the dye bath, sprayed on, or applied by kiss roll.

FIBRO LUBE MFB

This product is designed for use in Superba dye machines to allow easy release from transport belts. It is cationic and imparts yarn softening properties.

FIBRO LUBE CCM-6

A nonionic dye bath lubricant to prevent crack marks and crows feet in dyeing

FIBRO LUBE KDL

A cationic lube for softening and prevention of abrasion in dyeing of heavy weight goods.