Surface Protectants and Soil Releases
ISD has a line of unique products for use as additives to provide protection and soil release to hard and soft surfaces. The line of products are specially designed to fit specific applications needs. From automotive treatments to soil repellents for hard surfaces and fibers, ISD’s products give excellent function and market positioning for your products.
| Product | Description | Product Literature |
| FibroQuat SQ | FibroQuat SQ is a special cationic silicone that is very effective at low use concentrations. FibroQuat SQ is an excellent protectant from both water based and greasy soils. FibroQuat SQ can be used as a rinse aid at very low use levels in order to provide water beading and protection from road soils and atmospheric grime. FibroQuat SQ is an excellent additive to auto windshield washer formulations where it provides beading and rain repellant properties. FibroQuat SQ is an effective additive to cleaners where it provides the added benefit of stain protection with cleaning. | |
| FibroGuard X8 | FibroGuard X8 is a fluorinated polymer that can be diluted with water to form a protective barrier on fabrics, upholstery, carpet; masonry, leather, suede and most any other surface where penetration can be accomplished with water. | |
| FibroGuard X10 | FibroGuard X10 is a proprietary fluorinated polymer. FibroGuard X10 is an excellent repellant for water and oil based soils and stains. Applications include carpet, upholstery, rugs, leather, apparel, stone/masonry, and wood. Dilute FibroGuard X10 with 20 to 60 parts of solvent and apply by spraying. FibroGuard X10 dries to touch in 20-30 minutes | |
FibroQuat MAX |
FibroQuat MAX is a proprietary cationic polymer made from natural oils and reactive organo silicones. FibroQuat MAX is an excellent repellant for water and oil based soils and stains. Applications include hard surface protectant, wood, stone, masonry, and almost any other hard or porous surface. FibroQuat MAX is an excellent final rinse polymer for automatic car washes. FibroQuat MAX is highly hydrophobic and a film former, (beads up) and has a glossy slick finish. Prototype formulas are available. |
|
| FibroSil EM-FS-50 | FibroSil EM-FS-50 is a fluoro silicone emulsion that is a very effective base for use in spray-and-wipe auto polishes. EM-FS-50 contains silicone fluoro polymers for the highest effectiveness in gloss and protection. | |
| FibroGuard OE | FibroGuard OE is a silicone based odor eliminator designed for industrial and consumer use. FibroGuard OE acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. FibroGuard OE is a concentrate that can be diluted 5-10% by weight into water. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. FibroGuard OE has been tested against the following odors with success at a 5%-10% use level: smoke, butyric acid (body odor), amine odors, urine and ammonia. 5% dilutions of OE were compared against leading industrial and consumer products via test panel with success and consistently out lasted the competitive products. |
